Introduction to the function of hydraulic blasting testing machine
The so-called hydraulic blastability test bench is a method of using pressurized water to inject high-pressure water into the inside of the test piece to conduct a destructive test on the product. It is also a static hydraulic destructive test to detect the pressure limit of the product. .
Generally speaking, the hydraulic blasting test bench is the most widely used hydraulic destructive test bench for valves, pipes, shells, pressure vessels, welding points, etc., so the safety protection measures on site must be designed reasonably during testing. . Generally speaking, the blasting test benches of Fiant manufacturers will have a visual window with safety protection function. The general inspection pressure of the blasting test bench is much higher than the air pressure test and the air tightness test. Let me introduce you to the parameters of the test bench
Output pressure: 0-500Mpa Note: You can choose different stages of gas-liquid booster pumps according to your own pressure requirements (the core component of the blasting test bench)
Flow rate: 0-50L per minute, the liquid can hardly be compressed, you can choose to add a water injection pump for pre-injection according to the customer's on-site working conditions and product volume.
Control mode: computer type, digital display control type, manual type
Reference standard: According to GB/T5568, GB7939, ISO6802, ISO6803, ISO8032, GB/T12722, GB16897, GB/T5563, GB/T10544, GB/T5568 and other standards, hydraulic hose, hydraulic hose assembly, automobile brake tube , Pressure performance testing of powertrain tubes and other pressure-resistant parts.
